Middle Park Workdays

Postby Max D » Sat Sep 30, 2006 1:51 pm

DVS1 wrote:Padlocks were installed on Friday night.


Considering the vandalism at Duck Creek golf course on Thursday night, Good timing DVS
Max D
 
Posts: 57
Joined: Thu Sep 07, 2006 4:52 pm

Postby DVS1 » Sun Oct 15, 2006 2:32 pm

Clark, Joe, Brad Gill, and myself did some work on Friday and Saturday.

We installed pins:

1A and 1B
2A and 2C
3A and 3C
4B
5A and 5C
6A and 6C
7A and 7C
8A, 8B, and 8D
9C
10A
11B
12B and 12C
13A and 13B
14B and 14C
15A
16A and 16C (or B)
17A
18A (or B) and 18C

We will need to drill holes for 9B, 11A, and 17C at a later date.

We also drilled and set tee sign posts on every teepad.

I plan on moving positions tomorrow. I think 18 will become 1. The positions will probably go:

1A
2A
3A
4A
5B
6A
7A
8A
9A
10B
11A
12B
13A
14A
15B
16B
17A
18A

Hopefully this shorter setup will insure that we complete our league Monday night.
DVS1
 
Posts: 191
Joined: Mon Aug 28, 2006 11:34 am
Location: Q.C., in my basement, sorting the club's plastic

Postby batlord » Mon Oct 16, 2006 8:41 am

Thanks for the hard work out there, guys. Now Dan can stop painting the pin locations every three days. ha ha ha. If you would have let people know you were going out, I'm guessing you could have had a larger crew out there. Looking forward to playing these new locations.

Thanks again!
User avatar
batlord
 
Posts: 223
Joined: Tue Aug 29, 2006 8:57 pm

Postby GDL17921 » Mon Oct 16, 2006 9:01 am

batlord wrote:If you would have let people know you were going out, I'm guessing you could have had a larger crew out there.



How it's always been with the one man show till the forum came along. Now, no posts, no power, so back to the old. :roll:
User avatar
GDL17921
 
Posts: 8552
Joined: Mon Aug 21, 2006 9:57 am
Location: on a rock

Postby Lou Siffer » Mon Oct 16, 2006 9:37 am

Thanks for taking care of that, men. Hey, Dan, lose my phone number? :wink:
"Determine that the thing can and shall be done, and then we shall find the way."
-Abraham Lincoln
User avatar
Lou Siffer
 
Posts: 1843
Joined: Tue Aug 29, 2006 11:24 am
Location: Davenport, IA

Postby DVS1 » Mon Oct 16, 2006 11:56 am

Sorry guys. It was kind of a last minute thing. We really didn't need much help. There was a lot of standing around (waiting for the crete to be tansported to the holes) and it would have only taken about 15 minutes longer if I wasn't there. The only thing I really needed help on was convincing Jeff that some of his pin positions were stupid. Joe was a big help in that endevour though.
DVS1
 
Posts: 191
Joined: Mon Aug 28, 2006 11:34 am
Location: Q.C., in my basement, sorting the club's plastic

Postby Lou Siffer » Mon Oct 16, 2006 12:17 pm

Don't sweat it, Dan. You've done a fantastic job of coordinating and following through on getting this course in the ground.

You and everyone that put time in there should be very proud of the fact that they've contributed to installing one of (if not the) finest courses in the area.

Everyone pat youself on the back!
"Determine that the thing can and shall be done, and then we shall find the way."
-Abraham Lincoln
User avatar
Lou Siffer
 
Posts: 1843
Joined: Tue Aug 29, 2006 11:24 am
Location: Davenport, IA

Previous

Return to Bettendorf - Middle Park

Who is online

Users browsing this forum: No registered users and 1 guest