DM Open Aug 18th ~ Last Tournament at Ewing Park until 2015.

All Tournaments held in the state of Iowa or by Iowa affilitated clubs.

Postby Marcovis » Fri Jul 27, 2012 2:33 pm

Sounds great Dave!
Marcovis
 
Posts: 96
Joined: Mon Apr 19, 2010 11:23 am

Postby bman12449 » Fri Jul 27, 2012 5:03 pm

SpikeHyzer wrote:1: Short
9 short straight.
10: Right position if possible
13: Long right if it could be found
15: Short


Fixed. Sounds like dave has his layout already set. I respect that its his tourney to run., but I might have to steal me errrr borrow a key after the tourney is over. I wanna see 1,2,3 get moved to all there different pins befoe they destroy it. Wouldnt mind seeing some of the above spots as well. Fyi 13 long right is still there, and lets forget the short wooded one ever existed. We did install a short one by the road there that was pretty tough for only being 325ft.
I have inside jokes with strangers.
Most interesting man in the world.
bman12449
 
Posts: 401
Joined: Sun Feb 25, 2007 7:34 pm
Location: GVCC

Postby conroy_01 » Sat Jul 28, 2012 1:16 am

we got a flyer yet?
conroy_01
 
Posts: 91
Joined: Mon Jan 16, 2012 11:29 am
Location: in the tall grass looking for a disc

Postby Beerman » Sun Jul 29, 2012 12:36 pm

conroy_01 wrote:we got a flyer yet?


Flyer added to first page.
User avatar
Beerman
 
Posts: 1175
Joined: Mon Sep 25, 2006 10:12 am
Location: des moines

Postby Beerman » Sun Jul 29, 2012 9:15 pm

Well since I had to check th alternate pins and make sure the locks were working properly I went ahead and moved 9 baskets at ewing today. They are not in the first round layout yet, I just had to make sure they were still playable.

Did get some bad news about 11 long, it is not going to be playable without a new collar. :cry: debating on wether or not to replace this one since the mountain bike trail is there.
User avatar
Beerman
 
Posts: 1175
Joined: Mon Sep 25, 2006 10:12 am
Location: des moines

Postby Discgo » Sun Jul 29, 2012 9:54 pm

Beerman wrote:Well since I had to check th alternate pins and make sure the locks were working properly I went ahead and moved 9 baskets at ewing today. They are not in the first round layout yet, I just had to make sure they were still playable.

Did get some bad news about 11 long, it is not going to be playable without a new collar. :cry: debating on wether or not to replace this one since the mountain bike trail is there.
It would probably interfere with the trail back there and there is no reason to piss them off. I would see if there is a different place we can put it if we need a new collar anyways.
Chain-outs since last ace - 1
Discgo
 
Posts: 1488
Joined: Sun Feb 21, 2010 1:30 am
Location: behind the basket

Postby TTrammel » Sun Jul 29, 2012 10:26 pm

Beerman wrote:Well since I had to check th alternate pins and make sure the locks were working properly I went ahead and moved 9 baskets at ewing today. They are not in the first round layout yet, I just had to make sure they were still playable.

Did get some bad news about 11 long, it is not going to be playable without a new collar. :cry: debating on wether or not to replace this one since the mountain bike trail is there.
I have two brand new collar's someone could get off me pretty cheap couple of disc's or something like that :?: :?:
I speak my mind cause I can ! And no one can do anything about it !
TTrammel
 
Posts: 179
Joined: Sun Aug 07, 2011 10:04 pm
Location: Hell

Postby bman12449 » Sun Aug 05, 2012 9:49 am

Beerman wrote:Well since I had to check th alternate pins and make sure the locks were working properly I went ahead and moved 9 baskets at ewing today. They are not in the first round layout yet, I just had to make sure they were still playable.

Did get some bad news about 11 long, it is not going to be playable without a new collar. :cry: debating on wether or not to replace this one since the mountain bike trail is there.


Lovin the basket changes, seeing 9 in its original location got me stoked. It also gave me a flashback of sprague aceing it in my eyeball.
As far as 11 goes chuck them guys we did all the work to clear that out, plus ive only seen 2 ppl use rhat trail. You definitely have my blessing to replace that pin.
Travis do you know what size the sleeve is u have? Unfortunately there not universal in size. Ewings sleeves are different from grandview n big creek.
I have inside jokes with strangers.
Most interesting man in the world.
bman12449
 
Posts: 401
Joined: Sun Feb 25, 2007 7:34 pm
Location: GVCC

Sleeve's

Postby TTrammel » Sun Aug 05, 2012 9:33 pm

Beerman You live pretty close to me I can meet you if you think they will work or if you wanna see them , I have an 18" long sleeve x 2 and a 4" inch short sleeve x 2 , the ID = 2" and the OD = 2 1/8" - 2 3/8"
I speak my mind cause I can ! And no one can do anything about it !
TTrammel
 
Posts: 179
Joined: Sun Aug 07, 2011 10:04 pm
Location: Hell

Re: Sleeve's

Postby bman12449 » Mon Aug 06, 2012 9:18 am

TTrammel wrote:Beerman You live pretty close to me I can meet you if you think they will work or if you wanna see them , I have an 18" long sleeve x 2 and a 4" inch short sleeve x 2 , the ID = 2" and the OD = 2 1/8" - 2 3/8"


Cool we prolly need to meet up with dave and have him unlock a basket to see. Ewing sleeves are bigger so if it works there we can use it anywhere. Gv and Big creek have smaller sleeves. Nothing worse than setting a pin in concrete waiting couple days then realizing the chucker doesnt fit. Been there done that.
I have inside jokes with strangers.
Most interesting man in the world.
bman12449
 
Posts: 401
Joined: Sun Feb 25, 2007 7:34 pm
Location: GVCC

Re: Sleeve's

Postby TTrammel » Mon Aug 06, 2012 10:15 am

bman12449 wrote:
TTrammel wrote:Beerman You live pretty close to me I can meet you if you think they will work or if you wanna see them , I have an 18" long sleeve x 2 and a 4" inch short sleeve x 2 , the ID = 2" and the OD = 2 1/8" - 2 3/8"


Cool we prolly need to meet up with dave and have him unlock a basket to see. Ewing sleeves are bigger so if it works there we can use it anywhere. Gv and Big creek have smaller sleeves. Nothing worse than setting a pin in concrete waiting couple days then realizing the chucker doesnt fit. Been there done that.
yeah no sh-t that would suck give me a call 515-867-1265 we can set-up tym , I'm pretty much available anytym
I speak my mind cause I can ! And no one can do anything about it !
TTrammel
 
Posts: 179
Joined: Sun Aug 07, 2011 10:04 pm
Location: Hell

Postby SARG27044 » Mon Aug 06, 2012 10:22 am

Free coffee and muffins available before the first round! I might take orders for breakfast burritos too...not sure Im wanting to make breakfast for everyone on my Birthday tho :lol:
SARG27044
 
Posts: 6724
Joined: Tue Jan 29, 2008 12:28 pm
Location: D.M.

Open

Postby DLCdisc » Mon Aug 06, 2012 10:57 am

I didn't see this on the PDGA site yet. Maybe I just missed it. I will be there either way. Great work as always Dave & Co.
DLCdisc
 
Posts: 712
Joined: Thu Nov 20, 2008 8:33 pm

Re: Open

Postby GDL17921 » Mon Aug 06, 2012 11:04 am

DLCdisc wrote:I didn't see this on the PDGA site yet. Maybe I just missed it. I will be there either way. Great work as always Dave & Co.


Beery and I are working on that, thanks Captain obvioius :lol:
User avatar
GDL17921
 
Posts: 8554
Joined: Mon Aug 21, 2006 9:57 am
Location: on a rock

Re: Open

Postby Beerman » Mon Aug 06, 2012 2:06 pm

GDL17921 wrote:
DLCdisc wrote:I didn't see this on the PDGA site yet. Maybe I just missed it. I will be there either way. Great work as always Dave & Co.


Beery and I are working on that, thanks Captain obvioius :lol:


Fixed, this is now on the PDGA site.
User avatar
Beerman
 
Posts: 1175
Joined: Mon Sep 25, 2006 10:12 am
Location: des moines

PreviousNext

Return to Iowa Tournaments

Who is online

Users browsing this forum: No registered users and 1 guest

cron